Quote Calculator

Our Quote Calculator is ideal for straightforward gardens, helping you estimate costs and choose what you need. For more complex gardens, we recommend a site survey for a bespoke quote. Contact us via our enquiry form

Things to consider before ordering your DIY kit

Things to consider before ordering your DIY kit

Do I have access to materials locally?

Yes. If ordering a Supply Only kit, you’ll need to source a small selection of timber locally, such as the upright supports and 6x1 backing board used to support and attach the Katzecure system.

Which poles do you recommend for Supply Only?

We recommend aluminium poles for Supply Only installations. They come with pre-drilled pole end plugs, designed to hold the spring-loaded axles, making installation quicker and reducing the risk of drilling errors. They can also be shipped directly by courier and require less ongoing maintenance.

Aluminium is particularly suitable for agile cats, as it won’t naturally warp or twist in the way timber can, helping the poles continue to spin freely and effectively.

Timber poles are still available, but they require a little more work. As they cannot be sent by standard courier, delivery can take longer to arrange. You’ll also need to drill 60mm into the centre of each pole during installation. We can supply a drilling jig and 13mm auger to help with this.

As timber is a natural material, it can also be affected by changing weather conditions. If a pole warps or twists enough to affect its ability to spin freely, it may need replacing. For this reason, a timber system generally requires more ongoing maintenance than aluminium.

Is my garden suitable for Katzecure?

Before installing Katzecure, it’s important to consider the height and layout of your garden boundaries. Your fences or walls should be a minimum of 6ft high for the system to work effectively. If any areas fall below this height, they may be suitable for raising with trellis.

You’ll also need to look for anything your cat could use as a jumping platform within 6ft of the top of the system. This could include sheds, trees, bins, BBQs, garden furniture, raised beds or other structures close to the boundary.

These areas don’t necessarily mean Katzecure won’t work in your garden, but they may require additional protection or alterations to make sure your cat cannot use them to bypass the system.

If your garden is more complex or you’re unsure about any potential escape points, we recommend booking a professional site survey so we can assess the garden and advise on the safest solution.

How to Measure Your Garden

  1. Calculate the number of starter kits required

    A starter kit contains two brackets, fitted one at each end of a double pole run. These are ‘handed’ either left or right as you view the poles. Shown in the diagram as SK.

  2. Calculate the number of inner corners

    An inner corner is a corner that measures 90°. Shown in the diagram as IC.

  3. Calculate the number of outer corners

    An outer corner is a corner that measures 270°. Shown on the diagram OC.

  4. Measure the length of each side

    Our calculator can be used for gardens with up to eight sides. Enter the length of each side in metres. Our sample garden has five sides, marked A-E.

Create your DIY Installation Kit

Katzecure House Diagram

Important!

For Katzecure to work effectively, your fence or wall must be at least 6ft high, with any nearby jumping points also considered.

The 6ft Rule
At Katzecure, we work to one simple but essential principle – the 6ft rule.

Your fence or wall must be at least 6ft high for the system to work effectively. If your boundary is lower, adding trellis is often the simplest way to increase the height.

It’s also important to consider potential jumping points. Anything your cat could use as a platform must either be at least 6ft from the top of the system or suitably protected.

This could include BBQs, bins, garden furniture, sheds or trees positioned close to the boundary. Depending on the garden, we may recommend increasing the boundary height or adding additional protection around the potential jumping point.

Every garden is different, which is why we carefully consider these areas when designing a Katzecure system.