Shop

Two 10mm axles with plastic bearing and retainer springs.

Two 10mm axles with ball race and retainer springs.

Two simple brackets fitted with two Standard Runners, both on the same side, designed for fitting at the end of a double pole run. These are ‘handed’ either left or right as you view the poles.

Fittings supplied:

• 2 standard axles
• 2 deluxe axles
• 2 sleeves
• 4 springs
• 4 axle tubes

One simple bracket fitted with four Standard Runners, two on each side, designed for fitting in the middle of a double pole run.

Fittings supplied:

• 2 standard axles
• 2 deluxe axles
• 2 sleeves
• 4 springs
• 4 axle tubes

One bracket fitted with four standard runners to turn a 90-degree inwardly facing corner.

Fittings supplied:

• 2 standard axles
• 2 deluxe axles
• 2 sleeves
• 4 springs
• 4 axle tubes

One bracket fitted with four standard runners to turn a 90-degree outward facing corner.

Fittings supplied:

• 2 standard axles
• 2 deluxe axles
• 2 sleeves
• 4 springs
• 4 axle tubes

One bracket fitted with four standard runners to turn a 90-degree outward facing corner.

Fittings supplied:

• 2 standard axles
• 2 deluxe axles
• 2 sleeves
• 4 springs
• 4 axle tubes

These parts fit to the outer corner brackets or to the single sided double brackets, they offer added protection for particularly adventurous cats (Houdinis) that might attempt to escape via these points.

These parts fit to the outer corner brackets or to the single sided double brackets, they offer added protection for particularly adventurous cats (Houdinis) that might attempt to escape via these points.

One simple bracket fitted with a single Standard Runner, designed for fitting at the end of a single pole run. Basic fittings supplied.

One simple bracket fitted with two Standard Runners, designed for fitting in the middle of a single pole run. Basic fittings supplied.

The plastic Pole End Sleeves are required for both ends of all aluminium poles. Price is per pair.

The Pole End Sleeves are only fitted to the upper row of wooden poles, unless they are also specifically requested for the lower row for aesthetic reasons. These are included in kits. Price is per pair.

Tool used as a guide to ensure the correct location of the 10mm axle holes in the end of the Katzecure poles.